Ucrete MF - Heavy duty polyurethane hybrid flooring system

How does Ucrete MF work?

Ucrete MF is recommended for conditions requiring the maximum chemical resistance and where a smooth, even and easy to clean surface is required.

What makes Ucrete MF a unique solution?

Ucrete MF meets the needs of customers who need an easy to clean but chemically resistant floor that has a long life.

How can you benefit from Ucrete MF?

  • Expert application - Installed only by trained and approved specialist contractors.
  • Fast application /rapid access - Can be applied to 4-day-old concrete/2-day-old polymer screeds.
  • Short curing time - 8 hour access to foot traffic; 24 hours for vehicles.
  • Hygienic/Safe - Non-tainting, non-dusting, monolithic (minimum joints); easy to maintain; microbiologically inert.
  • Durable/long life - Wide chemical resistance; wear and impact resistant; resists cleaning temperature up to 80°C at 6 mm thickness and at 3mm to 60 °C; 25 years of international use.
  • Pre-packed - Pre-weighed/pre-packed for immediate use; batch-to-batch colour matched for consistency.
  • Colors - Yellow, Cream, Orange, Red, Green and Grey

Product Information

Technical Data Sheet

Specification Clause

Technical Information

Slip Resistance:

The Ucrete MF floors have coefficient of friction as determined to EN13036 Part 4 with 4S rubber on the wet floor as follows:
Ucrete MF   35

The Ucrete MF surface profiles conform to DIN51130 as follows:
Ucrete MF   R10 V 

Optimum slip resistance can only be maintained with regular cleaning.

Temperature Resistance:

A Ucrete MF floor is fully resistant to liquid spillage and discharge up to 70°C. Suitable for freezer temperatures down to -15°C. 


Non - Tainting:

Ucrete MF systems are solvent free and non-tainting from the end of mixing, as tested by Campden Technology Ltd.

Impact Resistance:

With high mechanical strengths and a low elastic modulus, Ucrete MF is very resilient and able to withstand severe impact loads. While no material is indestructible and surface chipping may occur, brittle
modes of failure resulting in cracking and disbondment are unknown with Ucrete floors.

Chemical Resistance

Ucrete MF offers exceptional resistance to a wide range of chemical aggressors. For example Ucrete is resistant to the following commonly encountered chemicals:
  • Most dilute and concentrated organic acids such as,
  • Acetic Acid, Lactic Acid, Oleic Acid and Citric Acid as commonly found in the food industry.
  • Dilute and concentrated acids: hydrochloric, nitric, phosphoric and sulphuric.
  • Dilute and concentrated alkalis, including sodium hydroxide to 50% concentration
  • Animal fats and vegetable oils, sugars flavourings and essences.
  • Mineral oils, kerosene, gasoline and brake fluids.
  • A wide range of organic solvents including Methanol, Xylene, Ethers and Chlorinated solvents.

Permeability

Ucrete MF exhibits zero absorption when tested to CP.BM2/67/2.

Cleaning and Hygiene

Ucrete flooring systems are accredited for use in facilities operating HACCP based food safety systems.
BASF Construction Chemicals MasterFlow Anchor Grouts

MasterFlow Anchor Grouts Software

Download our MasterFlow Anchor Grouts Software

Regional contacts

UAE:+97148090800   Oman:+96824218596   KSA:+966138538600   Jordan:+96265521672   Bahrain(dist):+97317786427   Kuwait(dist):+96524742533

Downloads

Ucrete MF_Spec

pdf (26.60 Kb)

Ucrete MF_TDS

pdf (78.90 Kb)